Coleman HVAC Home

News

Contact Us

Site Map
Homeowners


Products

Coleman® TV
Home > Dealer > Residential

HD
Nominal Capacities
2 - 5 Tons

Efficiency
AC/HP Dependent

Warranty
Compressor - NA
Heat Exchanger - NA
Parts - 10-Year Limited*

HD - Hz Duct Evaporator Coil

These HD series evaporator coils are designed to be installed with Coleman furnaces and to be matched with Coleman cooling and heat pump outdoor units.  All evaporator coils can be applied with orifices and may require a TXV for system ratings with certain outdoor units. Refer to the Technical Guide for the outdoor unit selected as part of your system.


Coils are provided as  "Flex-coils" without a factory installed metering device.  For added application flexibility, a R22 or R410A TXV is field installed on "Flex-coils"to meet your refrigerant choice.



Special Benefits
  • Horizontal Duct Coils - Available for both cooling and heat pump dedicated horizontal, slab coil, applications.  Field transition may be required.
  • Thermal Expansion Valve – Provides flexibility to convert any coil to R22 or R410A refrigerant.  A true bolt-on TXV, valve assembly and equalizer tube are bolt-on, no brazing required.  TXV and sensing bulb are mounted inside the cased coil cabinet.  (Must be field supplied for all “Flex-coils”).
  • Insulated Cabinet – All evaporator coil cabinets are thermally insulated with foil faced insulation to prevent sweating.
  • Internally Clean – All evaporator coils are factory leak-tested, dehydrated, sealed and shipped with a holding charge. 
  • Durable Finish Inside and Out ­– Coil casings are made of pre-painted steel. The pre-treated flat galvanized steel provides a better paint to steel bond, which resist corrosion and rust creep.  All internal metal parts are made of G90 pre-painted steel i.e. triangular plates, top plates, horizontal supports etc.  (Coil header plates are non-painted due to the brazing process during production.)
  • Optimum Heat Transfer - Using the latest in heat transfer technology, staggered rows of copper tubes are mechanically expanded into aluminum fins to provide optimum air to surface contact for ample moisture removal as well as high performance ratings.

*Must be installed on or after May 1st, 2009, and registered online within 90 days of installation. Otherwise, the warranty reverts to the standard warranty as published in the product warranty certificate.


Publications and Manuals
DescriptionPart NumberFile Size
Tech Guides
Technical Guide - FC/HD/MC/PC/UC Add-On Coils For Use With Split-System Cooling & Heat Pumps 813518-BTG-E-0114 330 KB PDF
Installation Instructions
Installation Manual - HD Series Horizontal Duct Coils for Cooling/Heat Pumps 900590-UIM-B-0613 252 KB PDF
Accessory Installation Instructions
Installation Accessory - S1-TVM2**, 4**, 7**, & 9** Thermal Expansion Valve Kits 166806-UAI-I-0413 243 KB PDF
Submittal Drawings
Submittal Data Sheet - HD Horizontal Duct Add-On Coils 825004-USD-B-0613 48 KB PDF
Repair Parts
HD Series Horizontal Duct Coils, Copper Flex Coil Models (Style A) 035-23426-001-A-1112 80 KB PDF
Repair Parts - HD Series Horizontal Duct Coils "Style A" 035-20830-001-C-0708 43 KB PDF
Repair Parts - HD Series Horizontal Duct R-22 TXV & Flex Coils "Style H" 035-22226-001-A-1208 43 KB PDF
Warranty Information
Warranty - UPG 10 year Limited Warranty on Air Handlers and Evaporator Coils and Parts 1088097-UWA-A-0114 29 KB PDF


Terms and Conditions | Privacy Policy
  Coleman® Coleman Logo and Coleman Logo are registered trademarks of The Coleman Company, Inc., used under license.
© 2001-2014 Johnson Controls, Inc. All rights reserved.
URL: http://colemanac.com/dealers/ProductPage.asp