Coleman HVAC Home

News

Contact Us

Site Map
Homeowners


Products

Coleman® TV
Home > Dealer > Light Commercial Products

HL 180 to 600
Nominal Capacities
180 - 600 MBH

Efficiency
9.7 EER

Warranty
Compressor - 5 year
Parts - 1 year

Split System 4 Pipe Condenser (HL) 15 to 50 Ton
These split system air conditioner models are completely assembled, piped, and wired at the factory to provide one-piece shipment and rigging. Each unit is pressurized with a holding charge of R-22 for storage and/or shipping.
The compact design, clean styling, and quiet operation make these condensing units suitable for almost any outdoor location.  On rooftops, because they weigh much less than a single package unit of similar capacity and are much easier to rig and support. At ground level, because their ample sub-cooling capacity allows them to be located 60 feet below the evaporator coil.
All Sheet metal parts are constructed of commercial grade (G90) galvanized steel, powder-paint coated to withstand a 750-hour salt-spray test.
A complete line of evaporator blower units is offered to meet your precise capacity and air-handling requirements.

Special Benefits
  • Built for efficient operation, long life, and moderate installation costs.
  • Exceeds an Ashrae 90.1 - 1999 energy standard. 
  • All units have matching Coleman upflow, downflow, or horizontal coils for non-furnace installations.
  • Offered in 208/230, 460, and 575 voltages are easy to handle.  They have base rails with forklift access and rigging holes.
  • Low ambient operation to 40°F is standard, and accessories for 0°F low ambient operations are available.
  • Installation time and costs are reduced by easy power and control wiring.  All units are factory wired, piped, charged, and tested prior to shipment.  Factory-installed options further reduce installation costs.
  • Electric utility knockouts are provided on unit side and bottom for easy connections.
  • Full-perimeter base rails are permanently attached to provide a solid unit foundation and fork lift access.  Compressor is internally protected against high pressure and temperature.
  • Grooved copper tubes and enhanced aluminum fin construction improve heat transfer.
  • Permanently lubricated condenser and evaporator fan motor bearings need no annual maintenance.
  • Coil guards and crankcase heaters are standard.
  • Hot gas bypass, low ambient VFD phase monitor and pump-out options are available for field installation.

Publications and Manuals
DescriptionPart NumberFile Size
Tech Guides
Technical Guide - HL/LL-15 & -20 Split System Cooling Units Four-Pipe System 246672-BTG-C-0206 547 KB PDF
Submittal Drawings
Submittal Data Sheet - HF-25/HL-30 thru -50 Split System Condensing Units 271838-CSD-B-0906 1033 KB PDF
Submittal Data Sheet - HL -15 & HL -20 Split System Condensing Units 036-22922-001-A-0804 72 KB PDF
CAD Drawings
CAD Drawing - DWG -HF, HA, HL 300 ABN0080A.DWG KB PDF
CAD Drawing - DWG -HF, HA, HL 300 ABN0081A.DWG KB PDF
CAD Drawing - DWG -HL, HB 240 ABN0082A.DWG KB PDF
CAD Drawing - DWG -HL, HB 480 ABN0084A.DWG KB PDF
CAD Drawing - DWG -HL, HB 600 ABN0085A.DWG KB PDF
CAD Drawing DXF - DWG -HF, HA, HL 300 ABN0080A.DXF KB PDF
CAD Drawing DXF - DWG -HL, HB 180 ABN0081A.DXF KB PDF
CAD Drawing DXF - DWG -HL, HB 240 ABN0082A.DXF KB PDF
CAD Drawing DXF - DWG -HL, HB 480 ABN0084A.DXF KB PDF
CAD Drawing DXF - DWG -HL, HB 600 ABN0085A.DXF KB PDF
Application Data Sheets
Application Data - General Piping Recommendations & Refrigerant Line Length for Split System Air Conditioners and Heat Pumps 247077-UAD-H-0209 435 KB PDF
Repair Parts
Repair Parts - Outdoor Split Systems HL 035-18557-000-A-1101 110 KB PDF
Warranty Information
Warranty - 1 Year UPG Parts & 5 Year Compressor 50.05-WC13V-0400 14 KB PDF


Terms and Conditions | Privacy Policy
  Coleman® Coleman Logo and Coleman Logo are registered trademarks of The Coleman Company, Inc., used under license.
© 2001-2014 Johnson Controls, Inc. All rights reserved.
URL: http://colemanac.com/dealers/ProductPage.asp