Coleman HVAC Home

News

Contact Us

Site Map
Homeowners


Products

Coleman® TV
Home > Dealer > Light Commercial Products

Outfitter NH/NJ R-410A
Nominal Capacities
90 - 300 MBH

Efficiency


Warranty
Parts - 1 Yr

Outfitter R-410A Split Airhandlers 7.5-25 Tons
The NH/NJ line is a flexible performer. They can be installed in up to 8 different positions and suspended in various positions. Evaporator blower units are designed with two distinct modules to provide maximum application flexibility. The 7.5-25 ton units are shipped as single packages with the blower module mounted on top of the coil module, The blower module can be repositioned in the field to meet almost any installation requirement.  The blower module includes the blower wheels, drives and a factory installed motor of your choice. (Motor excluded on NH-25) The coil module includes an R-410A direct expansion coil, 2 in. throwaway filters and rack that can be easily field altered to accept 4" filters.(Excludes NH-25) The units also include thermal expansion valves, distributors and a non-corrosive condensate drain pan. Every evaporator coil is pressurized with air and leak tested under water. After the headers are brazed onto the coil and the coil is installed in the unit, the coil is pressurized with a combination of helium and nitrogen and coil is evacuated, dehydrated and leak tested. The coil is pressurized with a holding charge of refrigerant-R410A for storage and/or shipping. Steam coils, hot water coils, base sections, suspension hardware, blower motors and drive packages are available as field-installed accessories to provide additional application flexibility. (Future Availability) These evaporator blowers, combined with condensing units, provide years of quiet, efficient and dependable operation. These units are manufactured under ISO 9001 Quality System Certification. Units may be bottom-supported or ceiling-suspended and can be arranged to meet almost any space or duct requirements.

Special Benefits
  • Ease of service
  • Base sections
  • Suspension packages
  • Hot water coils
  • Electric Heat Kits
  • Steam coils 
  • Standard and high static factory installed blower motors (Excludes NH-25)
  •  Factory-mounted expansion valve and filter-drier in both refrigerant circuit
  • Adjustable TXV’s
  • Two-inch throwaway filters
  • Field adaptable to accept 4" air filters
  • Single point power connection
  • Various vertical and horizontal application options
  • One-year limited warranty on all parts

Publications and Manuals
DescriptionPart NumberFile Size
Consumer Brochures
Consumer Brochure - Coleman Epoxy Polymer E-Coat Coil Coatings PUBL-7095-B-0814 1050 KB PDF
Consumer Brochure - Coleman Epoxy Polymer E-Coat Coil Coatings (High Quality Print Version) PUBL-7095-B-0814A 3544 KB PDF
Consumer Brochure - Outfitter™ Series 7.5 thru 25 Ton Split System Air Conditioners and Heat Pump Units PUBL-6520-A-0910 1061 KB PDF
Consumer Brochure - Simplicity® Controls for all 3 thru 25 Ton Products PUBL-6521-A-0910 1076 KB PDF
Tech Guides
Technical Guide - R-410A 7.5 - 25 Ton Split System Air-Cooled Condensing Units, Heat Pump Units and Air Handling Units (Generation 4) 505430-BTG-O-1114 4688 KB PDF
Installation Instructions
Installation Accessory - Electric Heat Accessory 10, 16, 20, 26, 32, 36 & 52kW For Split-System R-410A Air Handling Units Both Air Conditioners and Heat Pumps 7-1/2, 10, 15 & 20 Tons (Generation 2) 1110150-UAI-A-0314 2313 KB PDF
Accessory Installation Instructions
Non-Electrical
Installation Accessory - 1HW0406, 1HW0407, 1NF0454, Hot Water and Steam Coil Accessories For Commercial Split System R-410A Evaporator Blower Units 25, 30, 40 and 50 Ton 11260-UAI-E-0211 98 KB PDF
Electric Heat
Installation Accessory - Electric Heat Accessory 10, 16, 20, 26, 32, 36 & 52kW For Split-System R-410A Air Handling Units Both Air Conditioners and Heat Pumps 7-1/2, 10, 15 & 20 Tons (Generation 1) 536306-UAI-B-1009 1510 KB PDF
Submittal Drawings
Submittal Data Sheet - NH-07 thru -25, NJ-10 thru -20 Outfitter™ 2- & 4-Pipe R-410A Split System Air Handlers (Generation 4) 506447-CSD-G-1114 1045 KB PDF
CAD Drawings
CAD Drawing DWG -20 ton Split System Air Handler Unit ACB004A.DWG 596 KB PDF
CAD Drawing DWG -7.5 ton Split System Air Handler Unit ACB001A.DWG 151 KB PDF
Application Data Sheets
Application Data - General Piping Recommendations & Refrigerant Line Length for Split System Air Conditioners and Heat Pumps 247077-UAD-H-0209 435 KB PDF


Terms and Conditions | Privacy Policy
 
Coleman® Coleman Logo and Coleman Logo are registered trademarks of The Coleman Company, Inc., used under license.
© 2001-2014 Johnson Controls, Inc. All rights reserved.
Coleman on YouTube
Coleman on Twitter
URL: http://colemanac.com/dealers/ProductPage.asp