Coleman HVAC Home


Contact Us

Site Map


Coleman® TV
Home > Dealer > Residential

Nominal Capacities
2 - 5 Tons

AC/HP Dependent

Compressor - NA
Heat Exchanger - NA
Parts - 10-Year Limited*

MC - Multi-Position Evaporator Coil

These MC series evaporator coils are designed to be installed with Coleman furnaces and modular blowers and to be matched with Coleman cooling and heat pump outdoor units in all four configurations - upflow, downflow, and horizontal left or right.

All evaporator coils can be applied with orifices and may require a TXV for system ratings with certain outdoor units. Refer to the Technical Guide for the outdoor unit selected as part of your system.

Coils are provided as  "Flex-coils" without a factory installed metering device.  For added application flexibility, a R22 or R410A TXV is field installed on "Flex-coils"to meet your refrigerant choice.

Special Benefits
  • Thermal Expansion Valve – Provides flexibility to use R22 or R410A refrigerant.  A true bolt-on TXV, valve assembly and equalizer tube is available with no brazing required.  TXV and sensing bulb are mounted inside the cased coil cabinet.  (Must be field supplied for all “Flex-coils”)
  • Insulated Cabinet – All evaporator coil cabinets are thermally insulated with foil faced insulation to prevent sweating.
  • Internally Clean – All evaporator coils are factory leak-tested, dehydrated, sealed and shipped with a holding charge. 
  • Durable Finish Inside and Out ­– Coil casings are made of pre-painted steel. The pre-treated flat galvanized steel provides a better paint to steel bond, which resist corrosion and rust creep.  All internal metal parts are made of G90 pre-painted steel i.e. triangular plates, top plates, horizontal supports etc.  (Coil header plates are non-painted due to the brazing process during production.)
  • Optimum Heat Transfer - Using the latest in heat transfer technology, staggered rows of copper tubes are mechanically expanded into aluminum fins to provide optimum air to surface contact for ample moisture removal as well as high performance ratings.

*Must be installed on or after May 1st, 2009, and registered online within 90 days of installation. Otherwise, the warranty reverts to the standard warranty as published in the product warranty certificate.

Publications and Manuals
DescriptionPart NumberFile Size
Tech Guides
Technical Guide - FC/HD/MC/PC/UC Add-On Coils For Use With Split-System Cooling & Heat Pumps 1183386-BTG-A-1114 330 KB PDF
Technical Guide - MA/MC Modular Air Handlers/Coils for use with Split System Cooling and Heat Pumps 253462-BTG-P-0513 253 KB PDF
Installation Instructions
Installation Manual - MC / FC / PC Partial Cased and Full-Cased Evaporator Coils 900588-UIM-C-0214 1028 KB PDF
Accessory Installation Instructions
Installation Accessory - S1-TVM2**, 4**, 7**, & 9** Thermal Expansion Valve Kits 166806-UAI-I-0413 243 KB PDF
Submittal Drawings
Submittal Data Sheet - MA/MC Split-System Coil Single Piece Non Variable Speed Air Handler 254952-BSD-I-1114 231 KB PDF
Submittal Data Sheet - MC Full-Cased Multi-Position Add-On Coils 1183387-USD-A-1114 79 KB PDF
Submittal Data Sheet - MV / MC Single Piece Air Handler, Split System Coil 550572-USD-B-0412 102 KB PDF
Repair Parts
MC Series Multi-Position Coils w/Horizontal Pans, Copper Flex Coil Models (Style A) 035-23427-001-B-0614 216 KB PDF
Repair Parts - MC Series Multi-Position Coil w/Horizontal Pan "Style A" - R-410A TXV Models 035-22103-001-A-0708 224 KB PDF
Repair Parts - MC Series Multi-Position R-22 TXV & Flex Coil w/Horizontal Pan "Style A & B" 035-20827-001-H-1108 226 KB PDF
Repair Parts - MC Series Multi-Position R-22 TXV & Flex Coils w/Horizontal Pan "Style H" 035-22218-001-A-1208 227 KB PDF

Terms and Conditions | Privacy Policy
Coleman® Coleman Logo and Coleman Logo are registered trademarks of The Coleman Company, Inc., used under license.
© 2001-2014 Johnson Controls, Inc. All rights reserved.
Coleman on YouTube
Coleman on Twitter